 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP597G TOSHIBA Photocoupler Photo Relay TLP597G Cordless Telephone PBX Modem The TOSHIBA TLP597G consists of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a six lead plastic DIP package (DIP6). The TLP597G is a bi-directional switch which can replace mechanical relay in many applications. Unit in mm * * * * * * * * * Peak off-state voltage: 350V (min.) Trigger LED current: 3mA (max.) On-state current: 120mA (max.) (A connection) On-state resistance: 35 (max.) (A connection) Isolation voltage: 2500Vrms (min.) Isolation thickness: 0.4mm (min.) UL recognized: UL1577, file no. E67349 BSI approved: BS EN60065: 2002, certificate no. 8275 BS EN60950-1: 2002, certificate no. 8276 Option (D4) type : TUV approved: DIN EN 60747-5-2, Certificate no. 40011913 TOSHIBA Weight: 0.4 g 11-7A8 Pin Configuration (top view) 1 2 6 5 4 1 : Anode 2 : Cathode 3 : NC 4 : Drain D1 5 : Source 6 : Drain D2 3 Schematic 6 1 2 5 4 1 2007-10-01 TLP597G Absolute Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 25C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state RMS current Detector B connection C connection On-state current derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) (Note 1) A connection B connection C connection Tj Tstg Topr Tsol BVS ION / C ION Symbol IF IF / C IFP VR Tj VOFF Rating 50 -0.5 1 5 125 350 120 120 160 -1.2 -1.2 -1.6 125 -55~125 -40~85 260 2500 C C C C Vrms mA / C mA Unit mA mA / C A V C V Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1): Device considered a two-terminal device: Pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min. 5 -20 Typ. 7.5 Max. 280 25 120 65 Unit V mA mA C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 2 3 6 5 LOAD ~ 1 2 3 6 5 4 LOAD DC 1 2 3 6 5 4 LOAD DC AC or DC 4 A connection B connection C connection 2 2007-10-01 TLP597G Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 350 V V = 0, f = 1 MHz Min. 1.0 Typ. 1.15 30 40 Max. 1.3 10 1 Unit V A pF A pF Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current A connection On-state Resistance RON B connection C connection Symbol IFT Test Condition ION = 120 mA ION = 120 mA, IF = 5 mA ION = 20 ~ 120mA, IF = 5 mA ION = 120 mA, IF = 5 mA ION = 160 mA, IF = 5 mA Min. Typ. 1 22 26 13 7 Max. 3 35 40 20 10 Unit mA Isolation Characteristics (Ta = 25C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5 x 10 10 Typ. 0.8 10 14 Max. Unit pF Vrms Vdc 2500 5000 5000 Switching Characteristics (Ta = 25C) Characteristic Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 VDD = 20 V, IF = 5 mA (Note 2) Min. Typ. 0.3 0.1 Max. 1 1 Unit ms (Note 2): Switching time test circuit IF 1 2 4 6 RL VDD VOUT VOUT tON 10% 90% tOFF IF 3 2007-10-01 TLP597G IF - Ta 100 300 ION - Ta On-state current IONRMS) (mA) Allowable forward current IF (mA) 80 250 200 60 C connection 150 40 100 A connection B connection 50 20 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width 100s Ta = 25C 100 50 30 1000 500 300 Ta=25C IF - V F Allowable pulse forward current IFP (mA) (mA) Forward current IF 3 10 -3 3 10 -2 3 10 -1 3 10 0 10 5 3 1 0.5 0.3 0.1 0.6 100 50 30 10 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF / Ta - IF 1000 -2.8 IFP - VFP Pulse forward current IFP (mA) 500 300 Forward voltage temperature coefficient VF / Ta (mV / C) -2.4 100 50 30 -2.0 -1.6 -1.2 10 5 3 1 0.6 Pulse width 10s Repetitive Frequency = 100Hz Ta = 25C -0.8 -0.4 0.1 0.3 0.5 1 3 5 10 30 50 1.0 1.4 1.8 2.2 2.6 3.0 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2007-10-01 TLP597G IFT - Ta 3.0 2.5 ION = 120mA 200 ION - VON Ta = 25C IF = 5mA 100 2.0 1.5 On-state current ION (mA) -20 0 20 40 60 80 100 Relative trigger LED current IFT / IFT (Ta = 25C) 0 1.0 -100 0.5 0 -200 -4 -2 0 2 4 Ambient temperature Ta (C) On-state voltage VON (V) RON - Ta 60 ION = 120mA IF = 5mA 1000 500 IOFF - Ta VOFF = 350V On-state resistance RON () (nA) Off-state current IOFF -20 0 20 40 60 80 100 50 300 40 100 50 30 10 5 3 1 -20 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 5 2007-10-01 TLP597G RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01 |
Price & Availability of TLP597G07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |